Top 10 Overhead Door Manufacturers

I once had to replace every overhead door on a greenhouse site after the supplier failed us. It delayed our schedule and added costs.

I didn’t want to make that mistake again. Maybe you’ve had a similar experience.

That’s why I started checking every supplier more carefully. And when we find good ones, we write them down.

This list is based on what I’ve seen myself and from the feedback of others who run building projects. I focus on real-world performance, not just what a company claims.

Here, you’ll find 10 overhead door manufacturers. These are the ones that are consistent, reliable, and worth checking. If you’re looking for a new supplier or comparing options, this list will help.

You don’t want to waste time and budget on the wrong partner again.

So let’s begin!

Quick Comparison Chart

Choosing the right overhead door manufacturer depends on your project needs, speed, insulation, design, or regional supply. This table helps compare each brand at a glance.

Manufacturer	Best For	Product Focus	Pricing Level	Lead Time	MOQ Flexibility
Overhead Door™	Commercial builds in the U.S.	Sectional, rolling, fire-rated	Mid to premium	6–10 weeks	Moderate
Marvin	Design-focused villas and boutique hotels	Sliding, swing, folding glass doors	Mid to premium	6–10 weeks	Flexible
Vallisco	Export-ready villa and hotel builds	Aluminum, glass, garage, entry doors	Mid to high	6–10 weeks	Very flexible
Hörmann	Projects with EU standards or certifications	Sectional, fire-rated, high-speed	Premium	8–12 weeks	Low MOQ, bulk better
B&D Australia	Coastal and cyclone-prone regions	Steel roll-up, wind-rated	Mid-range	3–6 weeks	Flexible
Rytec Corporation	Industrial and logistics facilities	High-speed, impact-resistant, cleanroom	Premium	6–10 weeks	Best for grouped orders
CHI Overhead Doors	Villas and small hotels with design needs	Carriage, full-view, insulated garage	Mid to upper mid-range	6–8 weeks	High flexibility
Clopay	North American housing and entry doors	Residential, full-view, matching entry doors	Wide (budget to premium)	6–10 weeks	Flexible
Raynor	Energy-focused commercial and residential builds	Insulated, powder-coated, commercial sectional	Mid to upper mid-range	6–8 weeks	Moderate
Midland Garage Door	Cold-climate housing and multi-unit builds	Insulated sectional steel	Mid-range	6–10 weeks	Flexible

To read full details about each manufacturer, scroll up and check the full profiles below.

1. Overhead Door™

I’ve worked on more than a few building projects where doors became the hold-up. That’s when I started looking harder at the brands we were using. Overhead Door™ stood out. It’s been around since 1921 and helped shape how the modern overhead door works today.

They’ve built a big support network in the U.S. through trained dealers, which makes your project run smoother. If you’re running a hotel, villa, or warehouse build and need a dependable supplier that won’t fall through mid-order, they’re worth a closer look.

Product Range

• Sectional steel and aluminum doors
• Rolling service doors
• Thermacore® insulated doors
• Fire-rated doors
• Commercial operators and accessories

Pricing & Cost

• Price Position: Overhead Door™ falls in the mid to premium range. They focus on quality and offer better durability, which adds to the long-term value.
• Main Cost Factors: Price depends on door type, materials, insulation level, and hardware needs. Extra features or motor systems can raise the final cost.
• Minimum Order Quantity (MOQ): There’s no fixed MOQ, but larger orders through regional reps often give you better attention and possibly lower per-unit pricing.
• Bulk Discounts: Discounts may be offered if you’re doing multi-unit projects or ongoing orders. This works best through their national or dealer programs.
• Payment Terms: Terms vary by location. Some dealers offer staged payments for larger projects. Always ask during quoting to keep things clear upfront.

Lead Times & Production Turnaround

A typical production schedule runs 6 to 10 weeks, depending on the model, specs, and order size.

Some dealers keep standard sizes in stock, which helps if you’re in a hurry. It’s always worth checking that before choosing a custom model.

Most delays come from custom requests, like color matching, fire-rating requirements, or motor integrations that need approvals or factory adjustments.

Takeaway Note

Overhead Door™ works well for hotels, villas, and multi-unit builds that need strong support across U.S. regions. However, keep in mind that custom models can take longer, which may be a challenge if your timeline is tight.

2. Marvin

We first used Marvin when a villa client asked for doors that felt modern but still worked with wood. That project turned out better than expected.

Marvin has been making windows and doors since 1912. They’re a U.S.-based, family-owned company with a strong reputation for quality craftsmanship and design flexibility. While they’re best known for windows, their sliding and swinging doors have become a top choice for higher-end builds.

If you need style, long-term performance, and energy-efficient features, Marvin is worth checking out. Their process is organized, and their dealer network offers good support for project builds.

Product Range

• Sliding patio doors
• Swinging French doors
• Multi-slide and bi-fold doors
• Commercial-style glass doors
• Entry doors with wood or aluminum finishes

Pricing & Cost

• Price Position: Marvin falls into the mid to premium range. Their doors combine sleek design with strong thermal and structural ratings.
• Main Cost Factors: Price is influenced by material (wood, fiberglass, aluminum), size, energy ratings, hardware, and custom configurations.
• Minimum Order Quantity (MOQ): MOQ is generally flexible. Single or grouped orders are accepted through local dealers and project reps.
• Bulk Discounts: Volume pricing is available for residential developments, hotels, or multi-unit properties. Best arranged through Marvin’s project support team.
• Payment Terms: Payment terms depend on the dealer. Some offer phased payments; larger orders may qualify for extended terms.

Lead Times & Production Turnaround

Production timing runs about 6 to 10 weeks, depending on design complexity and material selection.

Their dealer network handles project scheduling. Once the specs are approved, Marvin follows a fixed workflow: final quote → production slot → delivery.

Custom finishes or hardware may take longer. It’s helpful to lock down specs early, especially during peak seasons.

Takeaway Note

Marvin is a great fit for builders working on high-end villas, boutique hotels, or design-focused homes. However, due to their premium design scope, they may not be the best choice for fast-turnaround or budget-constrained projects.

3. Vallisco

I first heard of Vallisco through a sourcing agent while reviewing vendors for a villa project in Malaysia. I didn’t know the name, so I asked around.

Turns out, they’re not new to doors, but the Vallisco brand itself is. Their team has been producing aluminum and glass doors since 2007 under different names. Vallisco, as a focused export brand, started around 2024.

Their factory is based in China, but they’ve built their systems around international buyers. That means faster quoting, clear export documents, and ready-made options for villas, greenhouses, hotels, and more. The language and process are easy to follow, even across time zones.

Product Range

• Overhead doors
• Sectional garage doors
• Side-hinged entry doors
• Automatic openers and remote kits
• Framed door systems

Pricing & Cost

• Price Position: Vallisco stays in the mid to upper-mid range. Their price reflects design focus, aluminum use, and export packaging.
• Main Cost Factors: Price depends on size, color coating, opening mechanism, insulation, and hardware grade. Automation adds more.
• Minimum Order Quantity (MOQ): MOQ is flexible for small group projects or multi-door builds. For best rates, full container orders are preferred.
• Bulk Discounts: Larger builds, like villas or resorts, get price breaks. Repeat clients may qualify for custom pricing tiers.
• Payment Terms: Standard terms are 30% down, 70% before shipment. Some projects may arrange other options depending on region and relationship.

Lead Times & Production Turnaround

Their usual lead time runs between 6 to 10 weeks, starting once drawings and deposit are confirmed.

Orders follow a clear flow: inquiry → design draft → approval → production → final check → ship. Most of this is done online with export staff.

Custom colors or rare hardware may add time. So there will be any delay in final approval or changes mid-process.

Takeaway Note

Vallisco is a smart pick for villa owners and hotel builders who need modern doors with export-friendly service. However, since it’s still a newer brand, long-term performance reviews and wide third-party feedback are limited, which can be a concern if your team prefers established names.

4. Hörmann

A project partner from Germany once said, “If you want something that just works, use Hörmann.” That stuck with me.

Hörmann started in 1935 and is still run by the same family. They’ve grown into one of the biggest door makers in Europe, with production sites across the region and even in Asia and the U.S.

You’ll notice the difference in how they handle logistics, specs, and certification. If you’re sourcing doors for villas, hotels, or mid-rise buildings in Europe, their local supply network helps you get things done faster, with less back-and-forth.

Product Range

• Sectional garage doors (residential and commercial)
• High-speed industrial doors
• Steel entrance doors
• Fire-rated steel doors
• Operators and smart control systems

Pricing & Cost

• Price Position: Hörmann’s pricing leans premium. Their products come with long service life, safety features, and energy-saving insulation.
• Main Cost Factors: Costs depend on type, size, finish, country-specific certifications, and hardware packages. Extras like fire rating or sensors increase pricing.
• Minimum Order Quantity (MOQ): For standard items, MOQ is low. Larger builds get better rates through authorized regional partners.
• Bulk Discounts: Available for project clients placing grouped or repeated orders. Europe-based builders get structured discount tiers.
• Payment Terms: Payment is typically staged, deposit, production, and balance before shipment. Financing may be offered through regional dealers for large projects.

Lead Times & Production Turnaround

Standard lead time is 8 to 12 weeks, depending on door type and certification. Orders are handled regionally. After specs are approved, production slots are booked. Shipment is direct from the closest plant to save time.

Delays may happen with custom fire-rated models or during construction peak seasons. Having final specs ready early helps avoid changes mid-process.

Takeaway Note

Hörmann is best for European projects that need strong compliance, tested quality, and nearby support. That said, for teams working outside of Europe, shipping and service coverage may not be as fast or cost-effective as local or export-focused brands.

5. B&D Australia

I learned about B&D during a supplier check for a residential villa build in Brisbane. The builder wouldn’t use anything else for roll-up doors. That got my attention.

B&D has been making garage and overhead doors since 1946. They’re credited with inventing the first all-steel Roll-A-Door, which many homes in Australia still use today. They now serve both residential and commercial projects, and their presence is growing across Southeast Asia and New Zealand.

They have a strong track record in coastal regions. That matters if your project faces rain, heat, or salty air. If you’re building in hot or humid climates, B&D doors are made to last under pressure.

Product Range

• Roll-A-Door® steel garage doors
• Panelift® sectional doors
• Wind-rated cyclone doors
• Automatic openers and accessories
• Custom color finishes and cladding options

Pricing & Cost

• Price Position: B&D falls into the mid-range bracket, leaning premium for cyclone-rated or insulated lines. Solid performance at fair price points.
• Main Cost Factors: Costs depend on size, wind rating, insulation level, automation, and region. Higher loads and special coatings increase the price.
• Minimum Order Quantity (MOQ): MOQ is flexible for small projects. Most builders can order per unit, but discounts appear around grouped orders.
• Bulk Discounts: Projects like housing developments or hotels can receive package pricing. It’s worth asking for a custom quote.
• Payment Terms: Most orders follow 50/50 payment or dealer terms. Some commercial builders may access staggered payment setups based on contract.

Lead Times & Production Turnaround

For most areas in Australia, production time is about 3 to 6 weeks. This can vary depending on your location or door type.

B&D has local dealers who handle quoting, order entry, and post-sale service. For exports, they work with shipping agents and offer packaging suited for container loads.

Delays may come from seasonal demand or special orders like wind-certified models. Planning early helps avoid those bumps.

Takeaway Note

B&D is ideal for builders in Australia, Southeast Asia, or coastal projects needing durable, weather-resistant overhead doors. Still, if you’re outside their core region, you may face higher freight costs or slower after-sales response compared to local suppliers.

6. Rytec Corporation

I first looked into Rytec when a cold-storage facility client in the U.S. needed a door that could open fast, without breaking down after 6 months.

Rytec is a U.S.-based company that started in 1985. They focus only on high-speed and industrial-grade doors. You won’t find basic garage doors here. Their products are built for fast access, high use, and tight control over temperature or airflow.

If your site handles logistics, food storage, or cleanroom zones, their systems can help save time and energy. What I like is that they test everything for real use, not just lab specs.

Product Range

• High-speed roll-up doors
• Impact-resistant industrial doors
• Cleanroom and food facility doors
• Spiral rigid aluminum doors
• Control systems and sensors

Pricing & Cost

• Price Position: Rytec is in the premium range. Their focus is on performance, speed, and durability, not low-cost entry doors.
• Main Cost Factors: Pricing depends on opening size, door speed, material (aluminum, fabric, PVC), sensors, and use environment (cleanroom, freezer, etc.).
• Minimum Order Quantity (MOQ): Most orders are placed per project. MOQ isn’t strict, but they cater better to multi-door or system-wide orders.
• Bulk Discounts: Discounts apply for full-facility installs or multiple site rollouts. Bigger orders may qualify for custom terms.
• Payment Terms: Payment plans vary. Larger contracts may involve staged payments tied to approval, production, and delivery.

Lead Times & Production Turnaround

Typical production takes 6 to 10 weeks, depending on model complexity and order volume. Rush orders are possible, especially if it’s a replacement for an existing Rytec system. Their team also helps with scheduling installs if needed.

Delays are rare, but may happen if special sensor kits or system approvals are required. Early tech review avoids this.

Takeaway Note

Rytec is a top choice for high-use commercial or industrial builds where speed, automation, and durability matter most. That said, because they serve a narrow niche, they may not be a fit if you’re sourcing doors for general residential or light-use buildings.

7. CHI Overhead Doors

I came across CHI during a villa project where the client wanted a garage door that looked stylish but still worked like a tank. CHI checked both boxes.

Founded in 1981, CHI is based in Illinois, USA. They’ve grown through a wide network of dealers across North America. What I noticed is they balance design and function well, especially in residential and light commercial settings.

Their doors are built solid, but they also offer good-looking finishes, wood overlays, glass panels, and modern frames. If you care about looks as much as performance, this brand fits well into villa or boutique hotel projects.

Product Range

CHI makes several door types. These are popular across their customer base:

• Raised-panel steel garage doors
• Carriage house overlay doors (wood-look)
• Contemporary full-view aluminum doors
• Insulated commercial sectional doors
• Matching garage door openers

Pricing & Cost

• Price Position: CHI stays in the mid to upper mid-range. Their doors offer visual appeal, solid insulation, and flexible features.
• Main Cost Factors: Cost depends on design (overlay or full-view), panel style, insulation (R-value), windows, and region.
• Minimum Order Quantity (MOQ): Most dealers accept one-unit orders, but volume deals improve with grouped project purchases.
• Bulk Discounts: Bulk discounts are available for residential developers or hotel chains doing several installs. Worth discussing with your local dealer.
• Payment Terms: Payment options vary by dealer. Some offer split payments for contractors or net terms based on volume.

Lead Times & Production Turnaround

Standard production runs around 6 to 8 weeks, especially for custom finishes or panel styles.

Dealers often have popular models in stock for quicker turnarounds. You can save time by sticking with standard color and size.

Custom overlays and hardware can extend lead times. It’s best to confirm specs early and lock in your slot.

Takeaway Note

CHI is great for builders who need stylish yet strong doors for homes, villas, or small hotels. Still, because they work mainly through dealers, you might face variations in service or pricing depending on your local partner.

8. Clopay

I first worked with Clopay on a small hotel project in Ohio. The local contractor pushed for it, saying they never had issues with them. They were right.

Clopay is the largest residential garage door manufacturer in North America. They’ve been around for over 50 years and offer a wide range of styles. Their commercial lines are growing too. If you’re working on villas, small hotels, or housing developments, you’ll probably find something that fits.

Product Range

• Modern steel and aluminum garage doors
• Carriage-style and faux wood overlay doors
• Insulated commercial overhead doors
• Full-view aluminum doors for shops or modern villas
• Entry doors (fiberglass and steel)

Pricing & Cost

• Price Position: Clopay covers a wide range, from budget-friendly to premium finishes. Their mid-range doors are the most commonly used in B2B projects.
• Main Cost Factors: Price is affected by door material, insulation level, window inserts, surface finish, and opener system.
• Minimum Order Quantity (MOQ): One-door minimums are allowed through dealers, but grouped orders get more attention and better pricing.
• Bulk Discounts: Discounts apply to multi-door orders, especially for developers or builders working on full-unit housing or small hotel builds.
• Payment Terms: Terms are set by each dealer. Most offer staged payments or net terms for contractor accounts with approval.

Lead Times & Production Turnaround

Standard production takes 6 to 10 weeks, depending on the model, region, and how custom your order is.

Popular designs and sizes are often available quicker through Clopay’s dealer stock. They have a strong supply chain across the U.S. and Canada.

Custom wood-look or high-R-value doors may take longer, especially during peak season. Ask early and get your slot in the queue.

Takeaway Note

Clopay is a strong choice for North American builders needing reliable garage or entry doors with style options. However, if you’re sourcing from outside North America, limited international support may slow down shipping and after-sales response.

9. Raynor

I was introduced to Raynor through a U.S.-based contractor who handled multiple residential builds. He liked them for one reason, “They don’t give me problems later.”

Raynor has been in business since 1944. They’re based in Illinois and ship all across the U.S. and internationally. Their doors are known for durability and strong insulation. What stood out to me was how easy they were to customize without running into issues later during install.

They’re also good at working with project teams. If you need fire ratings, thermal control, or powder-coated finishes for branding, they’ve got that ready. That helps if your build needs consistency across multiple locations.

Product Range

• Commercial sectional steel doors
• Insulated garage doors with high R-values
• Fire-rated and wind-rated doors
• Powder-coated finish options
• Matching commercial openers

Pricing & Cost

• Price Position: Raynor falls into the mid to upper mid-range. Their strength is durability and performance for long-term builds.
• Main Cost Factors: Pricing is affected by insulation type, coating finish, weatherproofing, and hardware systems. Custom colors or branding also raise costs.
• Minimum Order Quantity (MOQ): You can order small quantities, but they’re better suited to projects with grouped door needs for pricing and service efficiency.
• Bulk Discounts: Project pricing is available. They often give better terms for builders doing multiple sites or consistent volume orders.
• Payment Terms: Payment terms are flexible through distributors. You may find staged payments or net terms for qualified accounts.

Lead Times & Production Turnaround

The average turnaround is 6 to 8 weeks, depending on door specs and location. Raynor uses a network of dealers to manage orders and service. Standard models may be delivered faster if they’re in stock.

Custom finishes or unusual dimensions can take longer. To avoid delays, it’s best to finalize your specs early and keep change orders minimal.

Takeaway Note

Raynor is a strong pick for housing developers, commercial builders, and teams needing good thermal performance and long-lasting finish options. That said, since they work mostly through distributors, communication may vary depending on the region and dealer responsiveness.

10. Midland Garage Door

Midland came up while sourcing doors for a residential complex in Canada. The local builder mentioned they were known for handling cold weather well. That caught my interest.

Midland Garage Door has been operating since the 1970s. They’re based in North Dakota, USA, and serve both the U.S. and Canada. Their strength lies in building insulated overhead doors that hold up against tough weather.

If your project is in a place with snow, high winds, or strong seasonal shifts, Midland might be worth a closer look. Their focus is narrow but solid. They don’t try to do everything, they just do insulated doors well.

Product Range

• Insulated sectional steel doors
• Ranch and flush panel garage doors
• Thermally efficient overhead doors
• Commercial rolling and service doors
• Window and decorative insert options

Pricing & Cost

• Price Position: Midland sits in the mid-range category. Their pricing balances energy savings and structural strength without inflating the cost.
• Main Cost Factors: Pricing varies based on insulation thickness (R-value), door style, finish, size, and location. Upgrades to glass panels or hardware also matter.
• Minimum Order Quantity (MOQ): No strict MOQ for most orders. Larger projects often receive more attention and quicker scheduling.
• Bulk Discounts: Discounts are available for large builds or repeat clients. Multi-door orders usually get bundled quotes.
• Payment Terms: Dealers set the terms. Most offer milestone payments or progress billing for larger jobs.

Lead Times & Production Turnaround

Standard production lead time is around 6 to 10 weeks. This depends on model, order size, and whether it’s during peak season.

Their process is straightforward: once the order is approved, they lock in your schedule. Stocked items may move faster depending on your region.

Custom sizes or requests with higher R-values may need more lead time. Delays happen mainly during winter or regional freight issues.

Takeaway Note

Midland is a solid choice for builders working in cold-weather regions who need energy-efficient, reliable overhead doors. However, since their reach is mostly the U.S. and Canada, you might face limited access to product support or shipping efficiency outside North America.

Conclusion

The first time a door supplier failed us, we paid for it in lost time and extra labor. You don’t have to go through that.

This article laid out ten overhead door manufacturers that we’ve seen perform. Each one brings something different, speed, support, or long-term value.

If you’re serious about avoiding mistakes and keeping projects on schedule, look back through the list and match it to your build.

And if you’re sourcing for a villa or hotel, especially across borders, Vallisco might be your best fit for doors and windows.

Contact us today to get started.